Deals4cars

SS9745K FAI ANTI ROLL BAR BUSH KIT REAR REPLACES 1892602,7147150003,EMB7379One of FAI’s key Core values is best quality. In order to achieve this there are many quality processes in place with the manufacture of the parts that FAI supply. Let’s consider the aluminium parts. The aluminium is tested for the correct hardness and tensile strength to meet the requirements for the application and challenges of our roads and terrain . All wishbones and control arms are measured during machining at regular intervals to ensure dimensions remain consistent and in line with a detailed technical drawing. The swing angle of the ball joint is checked along with a torque test. Matching OE specifications and strength is key. A push/pull test of the ball joints on link rods and tie rod ends is performed on both the FAI part and the matching OE part to ensure that the results and quality are both the same. Link rods also experience a vibration test with a minimum of 1 million cycles to replicate the performance of the link rod on a vehicle. All FAI Steering and Suspension parts follow a rigorous quality programme and significant investment has been made to improve quality including additional robotic technology, completion of 5 different welds in one operation and hydraulic aluminium drilling for a faster, higher quality finish All parts are cataphoresis coated. This is highly technical paint process used by FAI factories following OE practice. Paint is attracted to the metal by the movement of charged paint particles towards the metallic surface to be painted. This reaches parts missed by spraying and offers better paint adhesion than dipping thus minimising the risk of corrosion. The salt spray test used by FAI factories exceeds most OE standards by 30%. The range extension covers a wide variety of Steering and Suspension parts with particular emphasis on anti-roll bar bushes and strut mounts.